BigRRR Enhanced V2 Mosfet
BigRRR Enhanced V2 Mosfet
Out of stock
BigRRR Enhanced V2 Mosfet
Product Description
Product Description
This is the BIGRRR processor controlled mosfet. This Mosfet is a great drop-in-mosfet which allows you to change shooting modes, controls RoF, pre-cocking, active braking, low battery indication, statistics etc.
Device is fully integrated inside the gearbox version 2 instead of the original trigger contacts. Comes with completely made wires to stock and to magazine terminals with mini fuse and XT30 connector — no soldering required, unless you want to change connections.
The BIGRRR has a built in temperature sensor and adjustable electronic fuse to prevent damage from overloading. As a further failsafe to protect the device and battery from short circuit a micro blade fuse is fitted in the battery wires.
FEATURES AND BENEFITS
- Significant improvements of ROF and ability to pull larger springs with less heat created over standard equipment.'
- Increase the life of LiPo batteries and protect them from damage and from blowing up.
- Built in failsafe: theBIGRRR comes with a mini-blade fuse and an electronic fuse to protect your investment from damage due to overloading.
DISCLAIMER
Whilst optical sensors that are used on other brands of FCU (Fire Control Unit) might be suitable for AirSoft they are limited in Gel Blasters why? Gel Blasters are frequently used in Full Auto because the ammunition is cheap and environmentally friendly, also because it's fun and to hit anything you need to shoot a lot more gels!
Constant and rapid cycling of the Mechbox creates excessive heat and wear on internal components without adequate lubrication. Optical sensors fail to operate when obscured by lubricants, subsequently using such devices means you cannot adequately lubricate a mechbox with an FCU that uses optical sensors. The BIGRRR uses mechanical switches that operate flawlessly when covered in lube. We have Blasters that have worn out gear sets, motors, pistons and about every other moving part but the BIGRRR keeps on operating flawlessly.
IMPORTANT
Motors that have not been adequately insulated at the factory can cause a short circuit which will damage the BIGRRR during operation. We strongly recommend that ALL motors new or old are thoroughly tested prior to installation to avoid causing damage that is NOT COVERED by warranty. At the very least remove the brush contacts from the motor and ensure there is no continuity between the two brush plates.
FAQ
What is a Gel Blaster?
Gel blasters are hobby-sport toys that simulate military-style skirmishes. They are electric
or gas-powered devices that shoot soft, water-type orbeez called gel balls. Gel blasters offer
a safe and enjoyable way to engage in recreational activities, team-building exercises, and
competitive games.
Are Gel Blasters legal in Australia?
The legality of gel blasters varies by State. It is important to familiarize yourself with local laws and regulations regarding gel blasters before purchasing or participating in related activities, But yes overall Gel blaster’s used accordingly are legal in Australia.
How do Gel Blasters work?
Gel blasters use electric or gas-powered mechanisms to propel gel balls. Electric gel blasters are battery-powered and provide a consistent shooting experience, while gas-powered gel blasters use compressed gas to create a more realistic recoil and sound effect.
Are Gel Blasters safe for kids?
Yes, gel balls and gel blasters are harmless and pose no danger when they hit their targets or kids. They are made from biodegradable materials and disintegrate over time, ensuring minimal environmental impact.
How do I maintain and care for my Gel Blaster?
Maintaining your gel blaster is essential to ensure its longevity and optimal performance. Here are some general tips to help you care for your gel blaster:
- Read the manufacturer's instructions:
Familiarize yourself with the specific maintenance requirements and guidelines provided by the manufacturer for your gel blaster model.
- Cleaning:
Regularly clean your gel blaster, especially after use, to remove any dirt, debris, or gel residue. Use a soft cloth or brush and water to gently wipe down the exterior. Avoid submerging the blaster in water unless specified by the manufacturer.
- Lubrication:
Proper lubrication is crucial for the smooth operation of your gel blaster. Follow the manufacturer's recommendations on the type of lubricant to use and apply it to the designated areas, such as the gearbox and moving parts. Avoid over-lubrication, as it can attract dirt and cause malfunctions.
- Battery care:
If your gel blaster is electric-powered, take care of the battery. Follow the instructions regarding charging and discharging cycles to maintain battery life. Avoid completely draining the battery or leaving it unused for extended periods.
- Seek guidance:
To ensure you have a comprehensive understanding of gel blaster maintenance, consider referring to the GBU (Gel Ball Undercover) YouTube channel. They provide informative videos on various aspects, including maintenance, care, and troubleshooting, specific to gel blasters. These videos can offer valuable insights and practical tips to keep your gel blaster in top shape.
Remember, regular maintenance and proper care will not only extend the lifespan of your gel blaster but also contribute to a consistent and enjoyable shooting experience.
Can I modify my Gel Blaster?
Yes, gel blasters can be modified to enhance their performance or customize their appearance.
GBU (Gel Ball Undercover) offers a wide range of modification parts and accessories for gel blasters, providing enthusiasts with the opportunity to personalize and upgrade their blasters according to their preferences. Whether you're looking to improve accuracy, increase range, enhance durability, or simply add aesthetic enhancements, GBU offers a diverse selection of modification options.
It's important to note that modifying your gel blaster may require technical knowledge and skills. If you're new to gel blaster modifications, GBU can provide assistance and guidance through their installation help services. This ensures that you can make modifications safely and effectively, optimizing the performance of your gel blaster.
Remember to familiarize yourself with any local laws or regulations regarding gel blaster modifications, as certain modifications may be restricted or require specific permits in your area. Always prioritize safety and follow proper procedures when modifying your gel blaster.
How can I ensure safety while using Gel Blasters?
Safety should always be a top priority when using gel blasters. It is crucial to wear appropriate protective gear, such as eye protection, and follow all safety guidelines provided by the manufacturer. Always use gel blasters in designated areas and ensure that participants adhere to established rules and regulations.
